16 lug 2021

HOUSES WITH ZERO CO2 EMISSIONS THANKS TO POLYMER CONCRETE

Houses can now be produced and built without CO2 emissions thanks to the use of Polyblocks, polymer concrete. "Polyblocks are made in the extruder process from polyester resin and unspecific fillers such as foundry and desert sand or crushed building rubble and therefore do not require any cement or classic building sand", writes Polycare. Since polymer concrete has better mechanical properties than cement concrete (many times higher compressive and flexural strength), only a small amount of material has to be used to enclose the insulation of the poly block. Additional advantages of the material are water and UV resistance, insensitivity to temperature fluctuations and recyclability.

 

WHAT MAKES POLYCARE ENVIRONMENTALLY FRIENDLY

"The status quo in house construction corresponds to a classically linear life cycle", Polycare reminds us. The raw materials are extracted, processed into building materials and then assembled into a house. After an average of 60-80 years, houses are taken down or completely renovated and the former raw materials end up in the landfill. The most widespread building material is cement concrete, the manufacture of which is responsible for around 6-9% of all annual anthropogenic CO2 emissions (̴3 billion tons of CO2).

 

COMMITTED TO REDUCING CO2 PROPAGATION

With its commitment to reducing CO2 propagation in the manufacturing and building process, Polycare wants to revolutionize the building industry. Using its Lego-like modular construction system, the "Polyblocks", everyone can build their own affordable and environmentally friendly home. The blocks can be made from desert or recycled moulding sands without water. The binding agent is also partly made from recycled PET bottles.



Numero visualizzazioni:417

 

Articoli che potrebbero interessarti

01 lug 2025

«TUTTO CIÒ CHE ENTRA DAI NOSTRI CANCELLI RIMANE DENTRO»,  L’IMPIANTO DI RICICLO AVVENIRISTICO CHE ELIMINA GLI SCARTI

«Tutto quello che entrerà dai nostri cancelli, rimarrà dentro». Jacopo Fedi è il progettista di quello che viene definito il polo nazionale per il riciclo della plastica leggera. Si tratta del primo impianto italiano di questo tipo e sorgerà entro un paio d'anni a Massa Lombarda. A darne notizia è Il Resto del Carlino. PROGETTO DELL'AZIENDA ITALIANA POLIMERI Sarà molto interessante seguire ora gli sviluppi di questo progetto - finanziato dall'azienda Italiana Polimeri - che si è dunque posto ...
Continua >

In primo piano

ASA - ASA LG LI965

Naturale / Neutro

1,69 €/Kg

PS-HI / HIPS - Styrolution PS ESCRimo

Naturale / Neutro

1,57 €/Kg

HDPE

Naturale / Neutro

0,35 €/Kg

LDPE - FLEXIRENE CL 10 S

Naturale / Neutro

1,09 €/Kg

PET-G

Naturale / Neutro

3,70 €/Kg

HDPE - Hostalen 4731 B

Naturale / Neutro

1,34 €/Kg

PA66 - AC30

Nero

2,30 €/Kg

VENDI ANCHE TU ONLINE

Con PlasticFinder l'inserzione è anonima, gratuita e vieni pagato in anticipo per i prodotti venduti.

INZIA SUBITO!